ISO 9001:2008 and AS9100C certified
Latest News

DCA17.180 (180W)

Overview:
DCA17 is designed to power Low to medium power consumption single board computer systems, Peripherals, etc in an automotive and or Battery operated environment. The output are 5V Stby @ 1A, 5V @ 18A and 12V to 19V @ 90Watts (12V default jumper setting ) DCA17 input is compatible with 12 or 24 Volt battery systems. The power supply ON and OFF sequence is determined by the state of ignition / ON/OFF input. It has the ability to hand shake with SBC’s that are equipped with ACPI Handshake signals.

DCA17.180 (180W)

Specifications:

See the  pdf fileDCA17 tech specs  for more details.

 

 

Input:
Normal operating input voltage range: 7.5V to 32V DC
Peak input voltage range: 6.5V to 36V DC (less than 10 Sec at 50% duty cycle repetition)
Idle state power consumption: 2.5mA ( Loads at OFF state)
Input Power Mating connector: Plug: Molex: 39-01-2060; 2 x 6 Mini Foot Jr.
Input Protection: LC Pi filter and Transient protection
Input Fuse: 25A mini blade (Automotive mini blade fuse)
Input Power mating connector: Plug: Molex: P/N: 39-01-4030
Crimps: Molex: P/N: 30490-2012
Output: Line + Load
DCA 17 Output Ripple Regulation
+12 to 19V : 90W 100mv p-p max 1.5%
Output voltage selected by 2x3 Jumper jumper block
+5 V: 18A max, 22A pk 50mv p-p max 1%
+5 V standby: 1 A max, 2.5 A pk 50mv p-p max 1%
Power supplies overall efficiency: > 92% for 12V system and 86% for 24V system at 10% to 90% of full Load
Note: Power supply output is derated by 30% for 24V system use
Transient Response: 5uS to stead-state output voltage (with in 0.2% of Vout) for 10- 90% load change
Output Stability: 0.1% of Vout after 10 minute warm-up
Output Power mating connector: Plug: Molex: 39-01-2080; 2 x 4 Mini Foot Jr.
Power switch mating connector: Plug: Molex: 22-01-3027; 2 pin polarized locking conn.
Input:  
Normal operating input voltage range: 7.5V to 32V DC
Peak input voltage range: 6.5V to 36V DC (less than 10 Sec at 50% duty cycle repetition) 
Idle state power consumption: 2.5mA ( Loads at OFF state)
 

 

Output:  
+12 to 19V:
90W
Output voltage selected by 2x3 jumper block 
+5V: 18A max, 22A pk
+5V Standby 1 A max, 2.5 A pk

 

DCA17.180 (180W)



Add a review
Your e-mail:
Review:
Image:
Insert text from image:

DCA17.180 (180W)

Support & Download:
pdf fileDCA17 user guide
pdf fileDCA17 tech specs

DCA17.180 (180W)

$156.00

Options:
Conformal Coating
x = $0.00
+$8.00

Components total: $0.00