Input | |
Normal operating input voltage range: | 7.5V to 30V DC |
Peak input voltage range: | 6V to 33V DC (less than 10sec at 50% duty cycle repetition) |
Idle state power consumption: | < 3mA (without any output loads) |
Input Power Mating connector: | Plug: Molex: 39-01-4030 Crimps: Molex: 30490-2012 |
Output | 150W |
Ripple | Line+Load Regulation |
5V | 12A Max | 100mv p-p max | 1% |
5V Stand-by | 1A | 100mv p-p max | 1% |
Output voltage range on V1 output | 12V to 20V (Set with jumper) | 100mv p-p max | 1% |
+12V | 7.5A max, 10A Pk | ||
+13V | 6.9A max, 9.2A Pk | ||
+14V | 6.4A max, 8.6A Pk | ||
+15V | 6.0A max, 8.0A Pk | ||
+17V | 5.3A max, 7.0A Pk | ||
+18V | 5.0A max, 6.6A Pk | ||
+19V | 4.7A max, 6.3A Pk | ||
+20V | 4.5A max, 6.0A Pk |
General | |
Shut Down Delay Time: | 10 sec. (Default), 5min, 10 min, 15min, 30 min, 45min, 60min or 120min (set by Jumper) |
Start-up Voltage: | 10.5V, 11.5V, 12.5V or 13.5V +- 0.25V (Jumper selectable) |
Low battery shutdown voltage: | 7V, 9V, 10.5V or 12V +- 0.25V |
Low battery detection duration: | 10 Sec. |
Wake on interrupt operation time: | 20 minutes (while Ignition is Off) |
Ignition or ON/OFF input current: | <5 mA |
Remote/trigger output source current: | 0.30A max. (Switched Battery) |
MTBF: | 500,000 hrs min. |
Cooling: | Forced air or thermal coupling to heat sink for loads above 150W |
Operating Temperature Range: | -25C to 70C |
Input Fuse: | 15A mini Blade (Automotive mini blade fuse) |
External Dimensions | |
DC-DC PCB Module dimensions: | 160mm x 51mm x 16mm |
6.3" x 2.0" x 0.63" | |
Weight: | 120 Grams, 0.25 lb |
Part Number | Description |
DCA7.150-H | 150W Triple output, intelligent Vehicle DC-DC power supply |
DCA7.150-V | 150W Triple output, intelligent Vehicle DC-DC power supply with vertical connectors |
DCA7.150-HU | DCA7 with U-Frame/Heat Sink |
DCA7.150-HUC | DCA7 with Full case |